TCGE-0524-IR00
Drawing Hydraulic symbol
Pressure drop
Oil viscosity: 46 cSt (217 SSU) Fluid temperature: 40 °C
www.eltfluid.com
For general conditions and terms of use see page S.005.
This document is Elt Fluid property and therefore data or technical specification can
not be reproduced.
Eltfluid also reserves the right to modify all the above data, at any time.
Electric valve
1.02.009.1
E10N-28
Description
Electric cartridge valve on/off designed to hold the load or block
flow at high pressure application, where low leakage is requested.
Operation mode
COIL NOT POWERED: the valve in closed position blocks flow in
both direction. From 2 to 1 and 1 to 2.
COIL POWERED: the valve allows flow in both directions.
From 2 to 1 and from 1 to 2.
GENERAL DATA
Weight without coil: 0,19 Kg (0,42 lbs).
Ambient temperature range: -30 °C a 60 °C with standard seals
(NBR).
Max. proof pressure: 420 bar (6.090 psi).
Flow Max: 70 l/min (18,7 gpm).
Cartridge materials: high strength steel, internal parts hardened and
grinding.
0
3
6
9
12
15
0 10203040506070
0
50
100
150
200
812160
Flow from 2 to 1
Flow from 1 to 2
TECHNICAL DATA
HYDRAULIC
Max. working pressure: 350 bar (5.075 psi)
Flow rate: min 2 l/min (0,5 gpm)
max 70 l/min (18,7 gpm)
Fluid:
Viscosity:
Mineral based oil
From 15cSt to 250 cSt
Leakage: 0,5 cc/min (10 drops/min)
P max. 350 bar (5.075 psi)
Standard seals: O-ring NBR Seals Polyurethane
Cavity: SCN1020
Installation torque: 40 Nm
Coil nut torque: 2 Nm
Max contamination level: NAS 8 ISO 4406 19/17/14
Fluid temperature range: From -20 °C to +80 °C
Fatigue cycle life: 1.000.000 cycle at 350 bar
Seal kit std.: 5AG0026
ELECTRIC
Type of voltage: DC
Insulation index: H
Nominal voltage: +/- 10 %
Power at 20 °C: 20,5 W
ED*: 100% with ambient temperature range -20 °C
+40 °C
Coil code:
(see page 9.01.002)
S130-20S
*Note: For temperature or special conditions contact our sales department.
Solenoid valve 2 ways 2 positions,
poppet pilot operated, normally closed
TCGE-0524-IR00
*Note: Information about manual
override is available at page S.001
Ordering code
Elt Fluid S.r.l.
Via Ganapini, 15/2
Loc. Felina 42035
Castelnovo ne’ Monti (RE) ITALY
mail: info@eltfluid.com
P.IVA/C.F 02573790355
STANDARD HOUSING
Ordering code: See page 9.03.001
Material*: Aluminium/Steel
Max working pressure for aluminum body: 210 bar
Max working pressure for steel body: 350 bar
*Note: To correctly select the material, in relation to application, see page S.003.
Voltage
Seals
DN- Din
DU- Deutsch
AM- Amp Junior
3B- 3/8” BSP
4B- 1/2” BSP
3S- SAE 8
4S- SAE 10
24- Vdc
12- Vdc
Connector
None (std. without coil)
None (std. without override
)
Options*
None (std. only cartridge)
Housing size ports
A- Aluminium
Material std. housing
S- Steel
None (std. NBR)
Y- Polyurethane
For other options
contact Sales dept.
Inches
Millimeters
-
-
Dimensions
1.02.009.2
E10N-28
E10N-28
S- Screw out
T- Pull
None (std. NBR+Polyurethane)
81)$
+H[
5
